The Project Report on the Beam Engine Mini

 

Hacksaw Powered By Beam Engine Project Report | Mechanical Farm provides the best BE project ideas for mechanical engineering students and researchers to help them find the projects. Our list consists of the finest and most innovative topics and projects for the mechanical engineering final year. 

 

 

INTRODUCTION: 

  

 In this project, the output of a beam engine is used to force a reciprocating saw to reduce timber. Here, rather than the rotating fly wheel, it's meant to have a rotating reciprocating notice. This rotating reciprocating saw is used to reduce timber. Reciprocating saws that are pushed with the aid of strength are a common feature. But in locations wherein strength is scarce, or absent, it's miles tough to operate this system. However, because the beam engine powered notice runs on fuel, it can be used even in places where power is completely absent. A beam engine is a type of desk-bound steam engine. 

A desk-bound engine is an engine whose framework does no longer move. A desk-bound engine is used now no longer to propel an automobile, but to force a bit of motionless system, which includes a pump or electrical tools. In a beam engine, the piston is set up vertically, and the piston rod does no longer join immediately to the connecting rod, as a substitute to a rocker or beam above the piston and flywheel. The beam is pivotal inside the middle, with the cylinder on one facet and the flywheel, which includes the crank, on the other. The connecting rod connects to the alternative end of the beam, to the piston rod, and then to the flywheel.

 

 

ADVANTAGES OF A MINI HACKSAW WITH A BEAM ENGINE

• The cutting speed can be varied according to our needs by adjusting the timer. 

• It is portable. 

• It does not have any prime movers like an electric motor. 

• A mechanical hacksaw is simpler in construction than an

•  It is a compact one. 

• Less maintenance.

 

DISADVANTAGES OF A MINI HACKSAW POWERED BY BEAM ENGINE:

 

 

• Only smaller sizes and soft metals can be cut. 

• It is costlier than the mechanical hacksaw because of the compressor unit. 

• When the compressor is connected to a mechanical device, the efficiency is reduced.

 

 

 

BEAM ENGINE POWERED HACKSAW APPLICATIONS

 

 

• It is used in small-scale industries and in large-scale industries.

 

• It is useful when materials need to be cut in hazardous areas such as oil and gas refineries, chemical factories, or oil rigs, as well as dusty and wet environments where electric tools are not effective.  

• They are valuable tools in production environments such as pallet repair, shipbuilding, or fibreglass workshops, because they will last longer than electric tools.