Mechanical engineering project analysis for grinding wheels.

 

 

Mechanical engineering project analysis for grinding wheels.

 

Grinding is a metal removal process that employs an abrasive wheel whose cutting elements are grains of abrasive materials of high hardness and high refractoriness The sharp-edged and hard grains are held together by bonding material. Projecting grains  abrade layers of metal from the work in the form of very minute chips as the wheel rotates at high speeds of up to 60 m/s. In order to make the grinding wheel suitable for different work situations, its features such as abrasive, grain size, grade, structure, and bonding materials can be varied. A grinding wheel consists of an abrasive that does the cutting, and a bond that holds the abrasive particles together.

 

Company Product

 

Company is manufacturing various products with efficient quality. The next is the detail of the products and its specification.

 

 

Vertical Submersible Pump

 

The vertical submersible pump is used to lift the water from the dip well. The main use of it is to supply water for farming.

 

 

Horizontal Submersible Water Pump

 

Horizontal submersible water pump is used to supply the water for High rise Buildings, Bungalows / Housing Colonies, Sprinkler Systems, Cooling Plants

Fountains, Riverbed, Sump / Jackwell, Fire Fighting Systems, Canals, Open Wells, Lift Irrigation. Figure 1.4 shows horizontal submersible pump.

 

De Watering Drainage Water Pump

 

Dewatering drainage water pump is used to discharge the drainage of wastage water which has been already utilized in the process industries. Figure 1.5 shows the De Watering Drainage Water Pump.

 

 

Introduction

        

Manufacturing is derived from the Latin word manufactus, means made by hand. In modern  involves making products from raw material by using variousprocesses, by making use of hand tools, machinery oreven computers. It is therefore a study of the processesrequired to make parts and to assemble them in machines.The study of manufacturing reveals those parameterswhich can be most efficiently being influenced to increaseproduction and raise its accuracy.

                             

Grinding is a metal removal process that employs an abrasivGW whose cutting elements are grains of abrasive materials of high hardness and high refractoriness The sharp-edged and hard grains are held together by bondingmaterial. Projecting grains (Figure 1) abrade layers ofmetal from the work in the form of very minute chips as the

wheel rotes at high speeds of up to 60 m/s.

 

 

Grinding Process

 

System Elements - The system elements consist of inputs,disturbances, productive outputs, and non-productive outputs. The elements of a grinding system are illustrated in figure 2. Work piece material, Shape, hardness, stiffness, thermal.